Zhone 4821-A2 Guía de instalación descargar pdf (Pagina 21)

Installing the BitStorm 4800 Express on a Wall

4821-A2-ZN21-30 BitStorm 4800 Express Model 4821-A2 Installation Guide

Installing the BitStorm 4800 Express on a Wall

Wall mounting requires two wood screws suitable for the weight of the fully

cabled unit. These are not included. Use at a minimum 1/4-inch (6 mm)

diameter screws in 3/4-inch (19 mm) plywood (not drywall).

To install the BitStorm 4800 Express on a wall:

1 Identify the 6-32 x 3/16-inch flat-head screws provided in the hardware

kit and the brackets suitable for a 23-inch rack. Two screws are required

for each bracket.

2 Orient the unit so that the bottom is facing you and the faceplate is at the

top.

3 Locate the supplied Right Side mounting bracket and fasten it to the right

side of the unit.

4 Locate the supplied Left Side mounting bracket and fasten it to the left

side of the unit.

5 Tighten all screws firmly.

05-17634

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 53 54

Sin comentarios

Zhone 4821-A2 Guía de instalación Pagina 21