Zhone 8985 Guía de usuario descargar pdf (Pagina 8)

8 March 2005 8900-A2-GZ40-40

4. Insert the bottom edge of the locking pivot bracket inside the lower edge of the

rear panel cutout next to that connector.

5. Align the two connectors.

6. Rotate the connector until it is fully seated.

7. Tighten the captive screw on the top of the cable's connector.

8. If a ferrite choke is supplied with your line card, clamp it around the cable as

close as possible to the chassis. If it fits loosely around the cable, fasten it with

a cable tie.

Locking Pivot

Bracket

Receptacle on Backplane

Rear Panel

Cutout

99-16163d-01

Rotate

99-16163e-01

99-16163f-01

Tighten Screw

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 17 18

Sin comentarios

Zhone 8985 Guía de usuario Pagina 8